Translator Disclaimer
13 August 2002 Spatial scanning time-domain electromagnetic sensor: high spatial and time resolution signatures from metal targets and low-metal content land mines
Author Affiliations +
Abstract
This paper describes a spatial scanning time-domain electromagnetic induction (EMI) sensor and presents results from recent field experiments with buried metal and low-metal content (LMC) anti-personnel (AP) and anti-tank (AT) plastic-cased land mines. The EMI sensor is an modified version of the Electromagnetic Target Discriminator (ETD) sensor developed for the US Army CECOM/NVSED by the Johns Hopkins University Applied Physics Laboratory. The spatial scanning ETD sensor has demonstrated the ability to measure metal target decay times starting approximately 6 ms after the transmitter current is turned off and with metal target decay time constants as short as 1 ms. The sensor antenna sweeps 80 cm over a target area and makes time-decay measurements at 14.5 mm intervals. In addition to metal target signatures, the paper describes coincident void and metal signatures from LMC land mines. The detection of coincident void and metal signatures is shown to be an important classification technique for LMC land mines.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Carl Vern Nelson and Toan B. Huynh "Spatial scanning time-domain electromagnetic sensor: high spatial and time resolution signatures from metal targets and low-metal content land mines", Proc. SPIE 4742, Detection and Remediation Technologies for Mines and Minelike Targets VII, (13 August 2002); https://doi.org/10.1117/12.479150
PROCEEDINGS
10 PAGES


SHARE
Advertisement
Advertisement
Back to Top