19 April 2002 Better quality of soldered joints through rapid laser-beam reflowing
Author Affiliations +
Proceedings Volume 4755, Design, Test, Integration, and Packaging of MEMS/MOEMS 2002; (2002) https://doi.org/10.1117/12.462870
Event: Symposium on Design, Test, Integration, and Packaging of MEMS/MOEMS 2002, 2002, Cannes-Mandelieu, France
Abstract
Rapid laser-beam reflowing turned out as an effective method for improving the structure based characteristics of solders and joints all the more with the application of higher melting contemporary Pb-free solders. The basic investigations on laser-beam induced rapid reflowing processes and the generation of grain-refined, restructured solder joints and metallization systems have been carried out on several unleaded alloys. The experimental tests have been concerned with structure, hardness; shear strength, wettability and long-term behavior. Grain refining and higher strengths of solder joints have been detected as the most substantial results after rapid reflowing. Leads that were laser-beam soldered under rapidly reflown solder showed about 10-40% higher shear strengths than in cases of using non-reflown solder. The maximum shear strengths have been attained by using rapidly reflown SnAg3, 8CuO, 7Sb0,2. Higher strength appeared in consequence of grain refining and increasing hardness, but also of structure stabilization due to Cu diffusion. Structure characteristics and strength did not weaken even after extended TCT.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fritz Herbert, Fritz Herbert, Lutz Dorn, Lutz Dorn, } "Better quality of soldered joints through rapid laser-beam reflowing", Proc. SPIE 4755, Design, Test, Integration, and Packaging of MEMS/MOEMS 2002, (19 April 2002); doi: 10.1117/12.462870; https://doi.org/10.1117/12.462870
PROCEEDINGS
5 PAGES


SHARE
RELATED CONTENT

Laser microwelding of electronic components
Proceedings of SPIE (June 17 2002)
Industrial applications of lasers
Proceedings of SPIE (January 24 2001)
Laser method for marking bar codes on glass substrates
Proceedings of SPIE (November 05 2000)
Laser spot welding of electronic micro parts
Proceedings of SPIE (October 07 2004)

Back to Top