CONFERENCE PROCEEDINGS
Advanced Search >
Home > Proceedings > Volume 4756 > Article
Translator Disclaimer
1 April 2003 Assembly sequence planning and assembling simulation of stamping die tools
Xinhua Yang; Zongying Ou; Peide Lu; Feng Han
Author Affiliations +
Proceedings Volume 4756, Third International Conference on Virtual Reality and Its Application in Industry; (2003) https://doi.org/10.1117/12.498001
Event: Third International Conference on Virtual Reality and Its Application in Industry, 2002, Hangzhou, China
Abstract
An appropriate oriented assembly product model should not only contain comprehensive and integral definition of each individual part but more importantly should also contain the definition of all the assembly relations between subassemblies and parts. First, the configuration information is collected and recorded in a configure file and attribute of relevant designed part solid models during stamping die tools design process. On the basis of configure file and CAD solid models, an assembly graph summarized the assembly relations inside of assembly is built. A stamping die tools product model is composed of all component part solid models, a configure file and an assembly graph. Afterwards, intelligent partition rules of subassemblies are presented. As a result of the partition, a whole assembly of stamping die tools is divided into several subassemblies and individual parts, and a hierarchical assembly tree is generated corresponding based on assembly graph. Assembly sequence planning can be generated by reasoning on the basis of configure file, asembly graph and hierarchical asembly tree. At last, an example is used to present the approach of assembly sequence planning and the simulating process of automatic assembling of stamping die tools.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Citation Download Citation
Xinhua Yang, Zongying Ou, Peide Lu, and Feng Han "Assembly sequence planning and assembling simulation of stamping die tools", Proc. SPIE 4756, Third International Conference on Virtual Reality and Its Application in Industry, (1 April 2003); https://doi.org/10.1117/12.498001
PROCEEDINGS
 6 PAGES
DOWNLOAD PDF SAVE TO MY LIBRARY
SHARE
GET CITATION
< Previous Article
|
Next Article >
Advertisement
Advertisement
KEYWORDS
RELATED CONTENT
Subscribe to Digital Library
Receive Erratum Email Alert
Back to Top