Paper
9 September 2002 Characterization of electroless nickel plating on aluminum mirrors
Steven L. Folkman, Michael Stevens
Author Affiliations +
Abstract
Electroless nickel is often plated on the surface of aluminum mirrors to improve the ability to polish the mirror surface. Electroless nickel plating can cause a bimetallic effect, creating distortion of a mirror surface if it is heated or cooled. Published data listing the thermal coefficient of expansion and Young's modulus as a function of temperature for electroless nickel is not readily available. This study examined using bimetallic bars to measure the Young's modulus and thermal coefficient of expansion of electroless nickel as it is cooled from room temperature to 100 K. A test chamber was developed which can accurately measure the rotations of a bimetallic bar as it is cooled. Elementary beam theory equations for a bimetallic beam were developed. These equations indicate that by testing beams with a variety of beam thicknesses, one should be able to determine modulus and thermal coefficient of expansion data for electroless nickel. The results show that the method fails to find accurate values. Very small measurement errors cause large changes in the modulus values. By using typical values for Young's modulus and the measured beam rotations, values for thermal coefficient of expansion for electroless nickel were obtained.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Steven L. Folkman and Michael Stevens "Characterization of electroless nickel plating on aluminum mirrors", Proc. SPIE 4771, Optomechanical Design and Engineering 2002, (9 September 2002); https://doi.org/10.1117/12.482167
Lens.org Logo
CITATIONS
Cited by 11 scholarly publications and 2 patents.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Aluminum

Mirrors

Plating

Temperature metrology

Nickel

Phosphorus

Surface finishing

RELATED CONTENT

Thermal Effects On Beryllium Mirrors
Proceedings of SPIE (October 26 1989)
Large stable aluminum optics for aerospace applications
Proceedings of SPIE (September 24 2011)
Metal Mirrors In The Large
Proceedings of SPIE (January 15 1976)
The limits of classical beam theory for bent strip residual...
Proceedings of SPIE (September 17 2007)

Back to Top