9 September 2002 Optomechanical design of 10 modular cameras for the Mars exploration rovers
Author Affiliations +
The 2003 mission to Mars includes two Rovers, which will land on the Martian surface. Each Rover carries 9 cameras of 4 different designs. In addition, one similar camera is mounted to each lander assembly to monitor the descent and provide information for firing the control jets during landing. This paper will discuss the mechanical systems design of the cameras, including fabrication tolerances of the lenses, thermal issues, radiation shielding, planetary protection, detector mounting, electronics, the modularity achieved, and how the 10 different locations were accommodated on the very tight real estate of the Rovers and Landers.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Virginia G. Ford, Virginia G. Ford, Paul Karlmann, Paul Karlmann, Edward C. Hagerott, Edward C. Hagerott, Lawrence M. Scherr, Lawrence M. Scherr, } "Optomechanical design of 10 modular cameras for the Mars exploration rovers", Proc. SPIE 4771, Optomechanical Design and Engineering 2002, (9 September 2002); doi: 10.1117/12.482162; https://doi.org/10.1117/12.482162


The Wide Field Imager instrument for Athena
Proceedings of SPIE (August 28 2017)
First light with NEWFIRM
Proceedings of SPIE (July 08 2008)
Use of a Nyquist chart for camera system evaluation
Proceedings of SPIE (May 14 2000)
Cassini imaging science subsystem
Proceedings of SPIE (October 06 1996)

Back to Top