11 September 2002 20K-cryogenic-temperature satellite materials outgassing facility for ASTM-E1559 standard
Author Affiliations +
Abstract
This paper describes the development of a facility for material outgassing measurements using quartz crystal microbalances (QCMs) operating at temperatures as low as 20K. The objective of this effort was to develop a system that operates in the 4 to 30K temperature range and that provides material outgassing data at much lower temperatures than have previously been available. The desired measurements are based on the ASTM Standard E1559 test method. Many space-based infrared sensor systems operate at temperatures much colder (i.e., 4 to 30K) than the 77K temperature commonly used in the E 1559 test method. The data collected will be used to compare material outgassing data collected at 77 and 20K to determine the differences in total mass loss (TML) measured at the two temperatures. This will provide an answer to the question that for a long time has been associated with the E1559 test method: Does the 77K QCM collect essentially all of a material's outgassed products??.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
William T. Bertrand, William T. Bertrand, John L. Prebola, John L. Prebola, Bob E. Wood, Bob E. Wood, } "20K-cryogenic-temperature satellite materials outgassing facility for ASTM-E1559 standard", Proc. SPIE 4774, Optical System Contamination: Effects, Measurements, and Control VII, (11 September 2002); doi: 10.1117/12.481657; https://doi.org/10.1117/12.481657
PROCEEDINGS
5 PAGES


SHARE
Back to Top