21 November 2002 Beryllium parabolic refractive x-ray lenses
Author Affiliations +
Abstract
Recently, we have been able to fabricate high quality parabolic refractive x-ray lenses made of beryllium. We report first experimental results in both full field microscopy and microbeam production using these new lenses. In full field microscopy, undistorted images of test patterns were recorded in a field of view of 450 μm full width half maximum at 12keV with 10 fold magnification. A significant improvement of the lateral resolution as compared to imaging with aluminium refractive lenses was achieved. Microbeam characteristics were determined at 12keV demagnifying a high β undulator source 82 times. The lateral beam size was measured by fluorescence knife-edge. Microbeam characteristics, such as flux, lateral beam size, and low intensity background are discussed.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Christian G. Schroer, Marion Kuhlmann, Bruno Lengeler, Til Florian Gunzler, O. Kurapova, Boris Benner, Christoph Rau, Alexandre S. Simionovici, Anatoly A. Snigirev, Irina Snigireva, "Beryllium parabolic refractive x-ray lenses", Proc. SPIE 4783, Design and Microfabrication of Novel X-Ray Optics, (21 November 2002); doi: 10.1117/12.451013; https://doi.org/10.1117/12.451013
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT

X ray optical objective based on Al and Be compound...
Proceedings of SPIE (November 04 2004)
Beryllium parabolic refractive x-ray lenses
Proceedings of SPIE (November 04 2004)
Parabolic compound refractive lenses for hard x rays
Proceedings of SPIE (January 05 2001)

Back to Top