Translator Disclaimer
21 November 2002 Near-field stacking of zone plates for hard x-ray range
Author Affiliations +
Abstract
We use Fresnel zone plates as focusing optics in hard x-ray microprobes at energies typically between 6 and 30 keV. While a spatial resolution close to 0.1 μm can currently be achieved, highest spatial resolution is obtained only at reduced diffraction efficiency due to manufacturing limitations with respect to the aspect ratios of zone plates. To increase the effective thickness of zone plates, we are stacking several identical zone plates on-axis in close proximity. If the zone plates are aligned laterally to within better than an outermost zone width and longitudinally within the optical near-field, they form a single optical element of larger effective thickness and improved efficiency and reduced background from undiffracted radiation. This allows us both to use zone plates of moderate outermost zone width at energies of 30 keV and above, as well as to increase the efficiency of zone plates with small outermost zone widths particularly for the energy range of 6 - 15 keV.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jörg Maser, Barry P. Lai, Wenbing Yun, Sarvjit D. Shastri, Zhonghou Cai, W. Rodrigues, Shenglan Xu, and E. Trackhtenberg "Near-field stacking of zone plates for hard x-ray range", Proc. SPIE 4783, Design and Microfabrication of Novel X-Ray Optics, (21 November 2002); https://doi.org/10.1117/12.451396
PROCEEDINGS
8 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Dark field image of full field transmission hard x ray...
Proceedings of SPIE (August 28 2006)
Advanced zone plate microfocusing optics
Proceedings of SPIE (November 05 1998)
Phase zone plates for hard x-ray microscopy
Proceedings of SPIE (November 05 1998)
Finite thickness effect of a zone plate on focusing hard...
Proceedings of SPIE (December 31 1990)

Back to Top