10 January 2003 Design and performance of the HEXIS CZT detector module
Author Affiliations +
Abstract
A large area (40 cm2) CZT module for space-borne X-ray astronomy applications has been under development at UCSD. This module employs four 32mm x 32mm x 2mm CZT crossed strip detectors with 0.5 mm pitch which are sensitive in the 10-200 keV range. The compact design includes readout and control electronics below the detector plane, which allows for efficient tiling of modules to form large detector planes for wide field of view coded mask imagers, or for efficient packaging within an anticoincidence shield at the focus of a hard X-ray telescope. The module has successfully been shaken on all three axes at 14 g rms to validate the mechanical design for spaceflight applications. Spectral, spatial, and imaging performance is presented.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Richard E. Rothschild, Richard E. Rothschild, James L. Matteson, James L. Matteson, William A. Heindl, William A. Heindl, Michael R. Pelling, Michael R. Pelling, } "Design and performance of the HEXIS CZT detector module", Proc. SPIE 4784, X-Ray and Gamma-Ray Detectors and Applications IV, (10 January 2003); doi: 10.1117/12.455699; https://doi.org/10.1117/12.455699
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT

The spectrometer telescope for imaging x rays on board the...
Proceedings of SPIE (September 16 2012)
High-energy x-ray imaging spectrometer (HEXIS)
Proceedings of SPIE (November 09 1998)
Position-sensitive CZT detector module
Proceedings of SPIE (June 30 1998)
A multi beam x ray imaging system based on carbon...
Proceedings of SPIE (March 01 2006)
Model calculations of the response of CZT strip detectors
Proceedings of SPIE (October 18 1999)

Back to Top