10 January 2003 Effects of p/n inhomogeneity on CdZnTe radiation detectors
Author Affiliations +
Spectrometer grade, room-temperature radiation detectors have been produced on Cd0.90Zn0.10Te grown by the low-pressure Bridgman technique. Small amount of indium has been used to compensate the uncompensated Cd vacancies for the crystals to be semi-insulating. The properties of the detectors are critically dependent on the amount of excess Te introduced into the growth melts of the Cd0.90Zn0.10Te crystals and the best detectors are fabricated from crystals grown with 1.5% excess Te. Detector resolution 57Co and 241Am radiation peaks are observed on all detectors expect the ones produced on Cd0.90Zn0.10Te grown from the melt in the stoichiometric condition. The lack of resolution of these stoichiometric grown detectors is explained by a p/n conduction-type inhomogeneity model.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Muren Chu, Muren Chu, Sevag Terterian, Sevag Terterian, David Ting, David Ting, Ralph B. James, Ralph B. James, Marek Szawlowski, Marek Szawlowski, Gerald J. Visser, Gerald J. Visser, } "Effects of p/n inhomogeneity on CdZnTe radiation detectors", Proc. SPIE 4784, X-Ray and Gamma-Ray Detectors and Applications IV, (10 January 2003); doi: 10.1117/12.457056; https://doi.org/10.1117/12.457056

Back to Top