18 November 2002 Semiconducting boron-rich neutron detectors
Author Affiliations +
Semiconducting boron-rich boron-carbon alloys have been deposited by plasma-enhanced chemical vapor deposition. Heterojunction diodes made with 276nm thick nanocrystalline layers of these alloys have been used as real-time solid-state neutron detectors. Individual neutrons were detected and signals induced by gamma rays were determined to be insignificant. Linearity of detection was demonstrated over more than two orders of magnitude in flux. The neutron detection performance was unaffected by > 1 x 1015 neutrons / cm2. The source gas closo-1,2-dicarbadodecaborane (ortho-carborane) was used to fabricate the boron carbon alloys with only the natural isotopic abundance of 10B. Devices made of thicker boron carbon alloy layers enriched in 10B could lead to increased detection efficiency.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Brian W. Robertson, Brian W. Robertson, Shireen Adenwalla, Shireen Adenwalla, Andrew Harken, Andrew Harken, Peter Welsch, Peter Welsch, Jennifer I. Brand, Jennifer I. Brand, John Paul Claassen, John Paul Claassen, Neil M. Boag, Neil M. Boag, Peter A. Dowben, Peter A. Dowben, } "Semiconducting boron-rich neutron detectors", Proc. SPIE 4785, Advances in Neutron Scattering Instrumentation, (18 November 2002); doi: 10.1117/12.453923; https://doi.org/10.1117/12.453923


Semiconducting boron-rich neutron detectors
Proceedings of SPIE (December 30 2003)
Research on the 1D PSD
Proceedings of SPIE (September 20 2002)
Designs for micro-structured semiconductor neutron detectors
Proceedings of SPIE (September 10 2008)

Back to Top