25 September 2002 Using detectors with photoelastic modulators
Author Affiliations +
Abstract
Photoelastic modulators (PEMs) are polarization modulation devices used in a wide range of experiments to probe the interaction between polarized light and matter. Experimental setups using PEMs rely on common detector types (photodiodes, photomultipliers, etc.) but care must be taken with their use. Specifically, 1. Care must be exercised to ensure proper impedance matching between the detector and the signal analyzing electronics, for example by using a trans-impedance preamplifier. 2. For silicon detectors, the responsivity at PEM frequencies (e.g. 100 kHz) decreases markedly for light wavelengths above about 900 nm 3. For circular dichroism experiments in the UV and visible, care must be taken in selecting a photomultiplier tube to minimize signal "artifacts" due to birefringence in optical components such as the sample cell and the PEM optical element.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Theodore C. Oakberg, Theodore C. Oakberg, Amanda J. Bryan, Amanda J. Bryan, } "Using detectors with photoelastic modulators", Proc. SPIE 4819, Polarization Measurement, Analysis, and Applications V, (25 September 2002); doi: 10.1117/12.450859; https://doi.org/10.1117/12.450859
PROCEEDINGS
9 PAGES


SHARE
Back to Top