Color printing on plastics using a slab RF-excited CO2 laser

Masaru Kawarazaki; Noriyo Sakurada; Yoshio Ishii; Yuzuru Kubota; Kazuhiro Watanabe

doi:10.1117/12.486553

Translator Disclaimer

19 February 2003 Color printing on plastics using a slab, RF-excited CO₂ laser

Masaru Kawarazaki; Noriyo Sakurada; Yoshio Ishii; Yuzuru Kubota; Kazuhiro Watanabe

Author Affiliations +

Proceedings Volume 4830, Third International Symposium on Laser Precision Microfabrication; (2003) https://doi.org/10.1117/12.486553
Event: LAMP 2002: International Congress on Laser Advanced Materials Processing, 2002, Osaka, Japan

Abstract

A coloring method using a laser system has been proposed in our laboratory. This method has the features as follows. i) The processing objects are plastic materials such as acrylic, nylon, epoxy, polyester etc. ii) Heating the dye solution by the irradiation of a laser, a material can be dyed at a local area of laser irradiation. iii) The images which printed by this method have persistence for erasing such as washing or rubbing. iv) Since the absorptivity of CO₂ laser to the dye solution is high, a slap, RF excited CO₂ laser was used as a heating source. This method, however, could be expressed only one-color image. In order to perform expression based on the digital image, not one-color but the colors printing of the image has been required. In this study, the innovative laser coloring method has been introduced for the colors printing. This method combines the laser processing dots which are possessed different colors. For example, by combining the dots of two colors, another color printing can be created. Otherwise, by changing the combining rate of the dots of two colors, more other color printing has been possible. A color printing on plastics using the innovative laser coloring method has been successfully attempted.

Citation Download Citation

Masaru Kawarazaki, Noriyo Sakurada, Yoshio Ishii, Yuzuru Kubota, and Kazuhiro Watanabe "Color printing on plastics using a slab, RF-excited CO₂ laser", Proc. SPIE 4830, Third International Symposium on Laser Precision Microfabrication, (19 February 2003); https://doi.org/10.1117/12.486553