19 February 2003 Deposition of LiNbO3 waveguide by pulsed-laser deposition
Author Affiliations +
Proceedings Volume 4830, Third International Symposium on Laser Precision Microfabrication; (2003) https://doi.org/10.1117/12.486589
Event: LAMP 2002: International Congress on Laser Advanced Materials Processing, 2002, Osaka, Japan
LiNbO3 thin films were deposited by pulsed-laser deposition (PLD) method. Crystalline and transparent films were deposited on sapphire substrates at 400 °C and in 100 mtorr of oxygen gas pressure. The waveguide properties, which were waveguide mode and loss, were measured by prism coupling method. Droplet less film was obtained with low ablation laser fluence and without scanning of ablation laser. The smallest waveguide loss was 32.9 dB/cm at present.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yoshiki Nakata, Yoshiki Nakata, Soichiro Gunji, Soichiro Gunji, Youhei Shimizu, Youhei Shimizu, Tatsuo Okada, Tatsuo Okada, Mitsuo Maeda, Mitsuo Maeda, } "Deposition of LiNbO3 waveguide by pulsed-laser deposition", Proc. SPIE 4830, Third International Symposium on Laser Precision Microfabrication, (19 February 2003); doi: 10.1117/12.486589; https://doi.org/10.1117/12.486589

Back to Top