19 February 2003 Micro welding of ultra thin metal foil using Yb-fiber laser
Author Affiliations +
Proceedings Volume 4830, Third International Symposium on Laser Precision Microfabrication; (2003) https://doi.org/10.1117/12.499620
Event: LAMP 2002: International Congress on Laser Advanced Materials Processing, 2002, Osaka, Japan
Present study was performed to determine the welding conditions for sound welding, efficiency and process of bead formation using Yb fiber laser for ultra thin metal foil (SUS304, thickness: 10~60μm). The influence of assist gas was investigated by the measurement of bead width at different gas flow rate and the conditions of keyhole welding was estimated with metal foil. Relationship between experimental results and thermal conduction calculation based on moving line heat source model was also investigated. Sound lap welding of 20μm to 30μm thickness was obtained.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Seo-jeong Park, Seo-jeong Park, Etsuji Ohmura, Etsuji Ohmura, Isamu Miyamoto, Isamu Miyamoto, } "Micro welding of ultra thin metal foil using Yb-fiber laser", Proc. SPIE 4830, Third International Symposium on Laser Precision Microfabrication, (19 February 2003); doi: 10.1117/12.499620; https://doi.org/10.1117/12.499620


High-power lasers for industrial and ecological use
Proceedings of SPIE (December 21 1998)
5-kW lamp-pumped Nd:YAG lasers and their applications
Proceedings of SPIE (September 13 1998)
Latest developments in laser manufacturing
Proceedings of SPIE (September 06 1994)
Early days of laser cutting
Proceedings of SPIE (August 17 1997)

Back to Top