3 March 2003 Effect of laser power on clad metal in laser-TIG combined metal cladding
Author Affiliations +
Proceedings Volume 4831, First International Symposium on High-Power Laser Macroprocessing; (2003) https://doi.org/10.1117/12.497595
Event: LAMP 2002: International Congress on Laser Advanced Materials Processing, 2002, Osaka, Japan
Abstract
TIG arc welding has been used to date as a method for clad welding of white metal as bearing material. We propose a new clad welding process that combines a CO2 laser and a TIG arc, as a method for cladding at high speed. We hypothesized that this method would permit appropriate control of the melted quantity of base metal by varying the laser power. We carried out cladding while varying the laser power, and investigated the structure near the boundary between the clad layer and the base metal. Using the laser-TIG combined cladding, we found we were able to control appropriately the degree of dilution with the base metal. By applying this result to subsequent cladding, we were able to obtain a clad layer of high quality, which was slightly diluted with the base metal.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Akihiro Utsumi, Akihiro Utsumi, Takanori Hino, Takanori Hino, Jun Matsuda, Jun Matsuda, Takashi Tasoda, Takashi Tasoda, Masafumi Yoneda, Masafumi Yoneda, Munehide Katsumura, Munehide Katsumura, Tetsuo Yano, Tetsuo Yano, Takao Araki, Takao Araki, } "Effect of laser power on clad metal in laser-TIG combined metal cladding", Proc. SPIE 4831, First International Symposium on High-Power Laser Macroprocessing, (3 March 2003); doi: 10.1117/12.497595; https://doi.org/10.1117/12.497595
PROCEEDINGS
6 PAGES


SHARE
Back to Top