3 March 2003 Modematic: a fast laser beam analyzing system for high power CO2-laser beams
Author Affiliations +
Proceedings Volume 4831, First International Symposium on High-Power Laser Macroprocessing; (2003) https://doi.org/10.1117/12.497931
Event: LAMP 2002: International Congress on Laser Advanced Materials Processing, 2002, Osaka, Japan
The performance of an industrial laser is very much depending upon the characteristics of the laser beam. The ISO standards 11146 and 11154 describing test methods for laser beam parameters have been approved. To implement these methods in industry is difficult and especially for the infrared laser sources, such as the CO2-laser, the availabl analyzing systems are slow, difficult to apply and having limited reliability due to the nature of the detection methods. In an EUREKA-project the goal was defined to develop a laser beam analyzing system dedicated to high power CO2-lasers, which could fulfill the demands for an entire analyzing system, automating the time consuming pre-alignment and beam conditioning work required before a beam mode analyses, automating the analyzing sequences and data analysis required to determine the laser beam caustics and last but not least to deliver reliable close to real time data to the operator. The results of this project work will be described in this paper. The research project has led to the development of the Modematic laser beam analyzer, which is ready for the market.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Flemming O. Olsen, Flemming O. Olsen, Dan Ulrich, Dan Ulrich, } "Modematic: a fast laser beam analyzing system for high power CO2-laser beams", Proc. SPIE 4831, First International Symposium on High-Power Laser Macroprocessing, (3 March 2003); doi: 10.1117/12.497931; https://doi.org/10.1117/12.497931


High power beam analysis
Proceedings of SPIE (February 20 2014)
Real time laser beam analysis system for high power lasers
Proceedings of SPIE (February 18 2011)
New autofocusing system for laser micromachining
Proceedings of SPIE (August 27 2003)
High Power Infrared Laser Beam Analyzers
Proceedings of SPIE (September 22 1987)

Back to Top