30 January 2003 Active optics and control architecture for a giant segmented mirror telescope
Author Affiliations +
Abstract
The next generation 30-meter class ground-based telescopes pose an unprecedented challenge for control systems envisioned to support diffraction limited imaging. Our approach is a multi-tiered, decentralized control architecture utilizing two kinds of feedback: optical and mechanical. Based on simulations, we suggest a configuration where the optical feedback loops for the main axes, secondary mirror rigid body motions and segmented primary mirror are separated in both temporal and spatial frequency domains. The active optics system maintaining the continuity and higher order shape of the primary mirror is based on mechanical sensors while the low order shape is corrected through optical feedback. Shown are the results of numerical simulations using real, measured wind data that prove the feasibility of the suggested architecture.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
George Z. Angeli, George Z. Angeli, Myung K. Cho, Myung K. Cho, Mark S. Whorton, Mark S. Whorton, } "Active optics and control architecture for a giant segmented mirror telescope", Proc. SPIE 4840, Future Giant Telescopes, (30 January 2003); doi: 10.1117/12.459850; https://doi.org/10.1117/12.459850
PROCEEDINGS
11 PAGES


SHARE
RELATED CONTENT

A fast steering tertiary mirror for the SOAR Telescope
Proceedings of SPIE (September 28 2004)
Fuzzy logic controller for the LOLA AO tip tilt corrector...
Proceedings of SPIE (September 10 1998)
Integrated modeling concepts for OWL
Proceedings of SPIE (June 21 2006)
Perturbation rejection control strategy for OWL
Proceedings of SPIE (June 21 2006)

Back to Top