30 January 2003 Design and Analysis of 20m track mounted and 30m telescopes
Author Affiliations +
Abstract
This paper presents designs of compact 21 and 30 m aperture telescopes with primary focal of f/0.7 and f/0.56. The 20 20 telescope moves on three axes; the elevation axis (which is below the primary vertex), the azimuth axis, and a tracking axis at the center of 100 m diameter tracks. The 30 m telescope has an elevation and azimuth axis. All of the axes move on hydrostatic bearings. A primary requirement for such large telescopes is stiffness against deformation by wind gusts. The mass and stiffness needed for the structure is substantially independent of the primary mirror mass, which can therefore be set by thermal and diffraction issues. For the 21 m design, whose primary has seven 8.4 m glass segments weighing 128 tons, the total moving mass is 905 tons, and the lowest resonant frequency 6.5 Hz. For the 30 m design, whose primary has, 13 whole and 6 half, glass segments 8.7 m, across the points, weighing 256 tons, the total moving mass is 3,460 tons, and the lowest resonant frequency 5.3 Hz. These practical designs offer two versatile telescopes with high performance.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Warren B. Davison, Neville J. Woolf, James Roger P. Angel, "Design and Analysis of 20m track mounted and 30m telescopes", Proc. SPIE 4840, Future Giant Telescopes, (30 January 2003); doi: 10.1117/12.459855; https://doi.org/10.1117/12.459855
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

Finite element analyses of CCAT preliminary design
Proceedings of SPIE (July 22 2014)
Large Binocular Telescope project
Proceedings of SPIE (August 02 2000)
Mechanical design of the Large Binocular Telescope
Proceedings of SPIE (June 01 1994)
Progress of the University of Texas 7.6m Telescope Design
Proceedings of SPIE (February 21 1986)

Back to Top