Design and fabrication of diamond-machined aspheric mirrors for ground-based near-IR astronomy

Raymond G. Ohl IV; Werner Preuss; Alex Sohn; Shelly Bright Conkey; Ken Garrard; John G. Hagopian; Joseph M. Howard; Jason Hylan; Sandra M. Irish; John Eric Mentzell; Mechthild Schroeder; Leroy Sparr; Robert S. Winsor; Said Wahid Zewari; Matthew A. Greenhouse; John W. MacKenty

doi:10.1117/12.458967

7 March 2003 Design and fabrication of diamond machined, aspheric mirrors for ground-based, near-IR astronomy

Raymond G. Ohl IV, Werner Preuss, Alex Sohn, Shelly Bright Conkey, Ken Garrard, John G. Hagopian, Joseph M. Howard, Jason Hylan, Sandra M. Irish, John Eric Mentzell, Mechthild Schroeder, Leroy Sparr, Robert S. Winsor, Said Wahid Zewari, Matthew A. Greenhouse, John W. MacKenty

Author Affiliations +

Proceedings Volume 4841, Instrument Design and Performance for Optical/Infrared Ground-based Telescopes; (2003) https://doi.org/10.1117/12.458967
Event: Astronomical Telescopes and Instrumentation, 2002, Waikoloa, Hawai'i, United States

Abstract

Challenges in fabrication and testing have historically limited the choice of surfaces available for the design of reflective optical instruments. Spherical and conic mirrors are common, but, for future science instruments, more degrees of freedom will be necessary to meet performance and packaging requirements. These instruments will be composed of surfaces of revolution located far off-axis with large spherical departure, and some designs will even require asymmetric surface profiles. We describe the design and diamond machining of seven aluminum mirrors: three rotationally symmetric, off-axis conic sections, one off-axis biconic, and three flat mirror designs. These mirrors are for the Infrared Multi-Object Spectrometer instrument, a facility instrument for the Kitt Peak National Observatory’s Mayall Telescope (3.8 m) and a pathfinder for the future Next Generation Space Telescope multi-object spectrograph. The symmetric mirrors include convex and concave prolate and oblate ellipsoids, and range in aperture from 92 x 77 mm to 284 x 264 mm and in f-number from 0.9 to 2.4. The biconic mirror is concave and has a 94 x 76 mm aperture, (formula available in paper) and is decentered by -2 mm in x and 227 mm in y. The mirrors have an aspect ratio of approximately 6:1. The fabrication tolerances for surface error are < 63.3 nm RMS figure error and < 10 nm RMS microroughness. The mirrors are attached to the instrument bench using semi-kinematic, integral flexure mounts and optomechanically aligned to the instrument coordinate system using fiducial marks and datum surfaces. We also describe in-process profilometry and optical testing.

Citation Download Citation

Raymond G. Ohl IV, Werner Preuss, Alex Sohn, Shelly Bright Conkey, Ken Garrard, John G. Hagopian, Joseph M. Howard, Jason Hylan, Sandra M. Irish, John Eric Mentzell, Mechthild Schroeder, Leroy Sparr, Robert S. Winsor, Said Wahid Zewari, Matthew A. Greenhouse, and John W. MacKenty "Design and fabrication of diamond machined, aspheric mirrors for ground-based, near-IR astronomy", Proc. SPIE 4841, Instrument Design and Performance for Optical/Infrared Ground-based Telescopes, (7 March 2003); https://doi.org/10.1117/12.458967

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available