Translator Disclaimer
Paper
27 December 2002 Aerial Image Microscope for the inspection of defects in EUV masks
Author Affiliations +
Abstract
The high volume inspection equipment currently available to support development of EUV blanks is non-actinic. The same is anticipated for patterned EUV mask inspection. Once potential defects are identified and located by such non-actinic inspection techniques, it is essential to have instrumentation to perform detailed characterization, and if repairs are performed, re-evaluation. The ultimate metric for the acceptance or rejection of a mask due to a defect, is the wafer level impact. Thus, measuring the aerial image for the site under question is required. An EUV Aerial Image Microscope (“AIM”) similar to the current AIM tools for 248nm and 193nm exposure wavelength is the natural solution for this task. Due to the complicated manufacturing process of EUV blanks, AIM measurements might also be beneficial to accurately assessing the severity of a blank defect. This is an additional application for an EUV AIM as compared to today’s use. In recognition of the critical role of an EUV AIM for the successful implementation of EUV blank and mask supply, International SEMATECH initiated this design study with the purpose to define the technical requirements for accurately simulating EUV scanner performance, demonstrating the feasibility to meet these requirements and to explore various technical approaches to building an EUV AIM tool.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Anton Barty, John S. Taylor, Russell M. Hudyma, Eberhard Adolf Spiller, Donald W. Sweeney, Gilbert V. Shelden, and Jan-Peter Urbach "Aerial Image Microscope for the inspection of defects in EUV masks", Proc. SPIE 4889, 22nd Annual BACUS Symposium on Photomask Technology, (27 December 2002); https://doi.org/10.1117/12.467918
PROCEEDINGS
12 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Inspection 13.2-nm table-top full-field microscope
Proceedings of SPIE (March 18 2009)
A dual-mode actinic EUV mask inspection tool
Proceedings of SPIE (May 06 2005)
RIM 13 a high resolution imaging tool for aerial...
Proceedings of SPIE (November 07 2005)
EUV imaging with a 13nm tabletop laser reaches sub 38...
Proceedings of SPIE (March 23 2006)
Actinic review of EUV masks
Proceedings of SPIE (March 20 2010)

Back to Top