Paper
27 December 2002 Feasibility study of detectivity and printability for TaSiOx-HTPSM
Author Affiliations +
Abstract
HT-PSMs (Half Tone Phase Shifting Masks) are well known as one of the key technologies to obtain high resolution and expand process window of lithography. And furthermore, high transmission HT-PSMs are expected to show better DOF and MEEF than conventional transmission, such as 6%, HT-PSM. We have already developed and reported TaSiOx shifter as a high transmission HT material for ArF lithography. And also we have reported its process performance such as good phase controllability, vertical side-wall angle, no damage on quartz surface during shifter dry etching and good CD uniformity. The key point to obtain these performances is the characteristics of etching stop function of its bi-layered structure. This bi-layered structure also enabled transmission at the inspection wavelength to keep enough low to inspect by current inspection systems. In this report, in order to confirm the feasibility of mass-manufacturing of the TaSiOx high transmission HT-PSM, we fabricated programmed defect test mask and performed following experiments. Defect detectability was evaluated by KLA-Tencor SLF27 and compared to printability results that were confirmed by ZEISS MSM193. We will also show some preliminarily results of repairing tests on this TaSiOx material.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Masaharu Nishiguchi, Yasutaka Morikawa, Toshiaki Motonaga, Kenji Noguchi, Shiho Sasaki, Hiroshi Mohri, Morihisa Hoga, and Naoya Hayashi "Feasibility study of detectivity and printability for TaSiOx-HTPSM", Proc. SPIE 4889, 22nd Annual BACUS Symposium on Photomask Technology, (27 December 2002); https://doi.org/10.1117/12.468201
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Inspection

Lithography

Photomasks

Defect detection

Dry etching

Etching

Phase shifting

Back to Top