18 October 2002 Development of deep-range and high-resolution laser 3D measurement system
Author Affiliations +
Proceedings Volume 4902, Optomechatronic Systems III; (2002) https://doi.org/10.1117/12.469140
Event: Optomechatronic Systems III, 2002, Stuttgart, Germany
Abstract
Generally, deep measurement range and high resolution are the directly opposed functions in the laser triangular measurement system. In other words, measurement range was made shallow to raise its resolution. But it is asked to go together to raise both functions caused by the complicated 3D shape of industrial products. We have coped with both functions by the individual optical technology and the image processing technology. At first, we have used axicon lens to minimize laser beam spot. Though it was possible to minimize laser spot with spherical surface lens only at the just focused position. But we have succeeded to generate thin spot laser beam which diameter is less than 20μm whole the so deep 300mm range with axicon lens. The second is high precision gravity center calculation method using gaussian curve fitting. This method could achieve the high resolution as well which contained speckle noise and so on. The system has been made practical for portable phone, and we confirmed the predominance of the system.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Seiji Hamano, Seiji Hamano, Noriaki Yukawa, Noriaki Yukawa, Tsuyoshi Nomura, Tsuyoshi Nomura, } "Development of deep-range and high-resolution laser 3D measurement system", Proc. SPIE 4902, Optomechatronic Systems III, (18 October 2002); doi: 10.1117/12.469140; https://doi.org/10.1117/12.469140
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT


Back to Top