18 October 2002 Influence of the machine vision lens to the accuracy in contactless 2D-metrology
Author Affiliations +
Proceedings Volume 4902, Optomechatronic Systems III; (2002) https://doi.org/10.1117/12.467251
Event: Optomechatronic Systems III, 2002, Stuttgart, Germany
Abstract
A model for quick estimation of the accuracy of the contactles 2D-measurement is developed. Perspective errors of entocentric lenses and distortion errors of entocentric and telecentric lenses are respected. The perspective error starts from the standard deviation of the working distance. The distortion contribution starts from the often publicized maximal distorint value in percent. The distorint contribution is divided in two parts: the size part considers the variation from calibration width and to width to measure, the field part considers the psoition variation of the piece under test in the field of view. Two graphs show typical and generally valuable functions. The superimpose of differnet contributions is realized as sum of quadrates. Due to this, the result can be interprted as the standard deviation of a contactless measured width. All results have the dimension pixel. Three examples are presented. The first one shows the accuracy limits in a typical machine vision application using different entocentric lenses. The second one discusses an entocentric lens measuring differnet object sizes. The third one uses a telecentric lens at same measuring condition. Here, the estimated accuracy is ten times higher.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Norbert Schuster, Norbert Schuster, Thomas Schoenheit, Thomas Schoenheit, } "Influence of the machine vision lens to the accuracy in contactless 2D-metrology", Proc. SPIE 4902, Optomechatronic Systems III, (18 October 2002); doi: 10.1117/12.467251; https://doi.org/10.1117/12.467251
PROCEEDINGS
11 PAGES


SHARE
RELATED CONTENT

Asphere wedge and decenter What you see is not...
Proceedings of SPIE (September 27 2016)
Fundamentals of on-line gauging for machine vision
Proceedings of SPIE (August 01 1990)
New international recommendations on LED measurements
Proceedings of SPIE (September 26 1997)
Automated visual inspection of cooking plates
Proceedings of SPIE (October 06 1998)

Back to Top