Paper
29 August 2002 InGaAs/Si avalanche photodiodes fabricated by wafer bonding
Zhong Pan, Martin Bitter, Alexandre Pauchard, Steve Hummel, Tao Feng, Yimin Kang, Phil Mages, Paul K. L. Yu, Yu-Hwa Lo
Author Affiliations +
Proceedings Volume 4905, Materials and Devices for Optical and Wireless Communications; (2002) https://doi.org/10.1117/12.481018
Event: Asia-Pacific Optical and Wireless Communications 2002, 2002, Shanghai, China
Abstract
We report here on wafer-bonded InGaAs/Si avalanche photodiodes (APDs) demonstrating very low excess noise factors that were fabricated using a high-yield, wafer-scale bonding process. The bonding interface quality was evaluated using high-resolution x-ray diffraction and dark current measurements. Measured dark currents on 20 μm diameter mesas are 25 nA and 170 nA at gains of 10 and 50, respectively. Low excess noise factors, which are predicted due to the superior noise properties of Si as a multiplication layer, were measured to be more than 3 times lower than commercial InGaAs/InP APDs at a gain of 10, and more than 9 times lower at a gain of 50. The corresponding electron/hole ionization coefficient ratio k in these devices is as low as 0.02.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhong Pan, Martin Bitter, Alexandre Pauchard, Steve Hummel, Tao Feng, Yimin Kang, Phil Mages, Paul K. L. Yu, and Yu-Hwa Lo "InGaAs/Si avalanche photodiodes fabricated by wafer bonding", Proc. SPIE 4905, Materials and Devices for Optical and Wireless Communications, (29 August 2002); https://doi.org/10.1117/12.481018
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Avalanche photodetectors

Silicon

Indium gallium arsenide

Wafer bonding

Interfaces

Absorption

Avalanche photodiodes

Back to Top