Paper
12 September 2002 Drilling with a novel high-power Q-switch pulse laser
Qiang Li, Yijun Zhen, Zhiyong Wang, Xiaobin Zhang, Tiechuan Zuo
Author Affiliations +
Abstract
This paper reports on the characterization and analysis of drilling with a novel high power acousto-optical Q-switch pulse laser. The laser is a flash-lamp pumped pulse Nd:YAG laser which can be used in the free running mode with repetition rates up to 10Hz. Additionally it is possible to modulate these pulses using acousto-optical modulator which enables a burst between 1 and 10 Q-switch pulses with a duration of typically 200ns during each flash-lamp pulse. The repetition rate of the burst is 5kHz-50kHz, the pulse energy is 30-8OmJ, and the peak power is more than 400kW with a beam parameter product of about 5mm mrad. The drilling process and the combination of different repetition rate of the bursts enables drilling 2.5mmthick Cu and Ni-alloy for 0.2mm micro-hole. The recast layer is nanower. Oxidation of the walls of the hole is prevented by a high-pressure inert gas.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Qiang Li, Yijun Zhen, Zhiyong Wang, Xiaobin Zhang, and Tiechuan Zuo "Drilling with a novel high-power Q-switch pulse laser", Proc. SPIE 4915, Lasers in Material Processing and Manufacturing, (12 September 2002); https://doi.org/10.1117/12.482914
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Laser drilling

Q switching

Q switched lasers

Modulation

Pulsed laser operation

Nd:YAG lasers

High power lasers

Back to Top