Paper
5 September 2002 Surface measurement using improved crossed-optical-axes geometry
Yuchi Lin, Xiaobing Niu, Dongmei Cheng, Meirong Zhao, Zhanyuan Sun, Yuxiang Zhang
Author Affiliations +
Abstract
Crossed-optical-axes project grating system is fundamental architecture in 3-D profilometry measurement. Confined by three conditional constraints, it has some limitations in practical application. An improved system relieving the constraints was proposed here. Geometrical deduction based on image ray tracing, optical triagulation and pinhole model was carried out. By projecting another central line fringe as the zero-phase datum, wrapped phase map about reference or measured object could be unwrapped without inducing systematic errors. The simulation was to measure a plate with a height of 80mm when changing geometrical parameters. Compared with the conventional configuration, new system approves more flexibility and maneuverability.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yuchi Lin, Xiaobing Niu, Dongmei Cheng, Meirong Zhao, Zhanyuan Sun, and Yuxiang Zhang "Surface measurement using improved crossed-optical-axes geometry", Proc. SPIE 4921, Optical Manufacturing Technologies, (5 September 2002); https://doi.org/10.1117/12.481748
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
CCD cameras

Charge-coupled devices

Projection systems

3D metrology

Cameras

Geometrical optics

Ray tracing

Back to Top