10 September 2002 Microstructures of PMMA sheet fabricated by RIE
Author Affiliations +
Abstract
The reactive ion etching (RIE) of commercial PMMA sheet has been examined in pure 02 and CHF3/02 plasma. The aim of this study was to optimize the etching PMMA process parameter. Addition of CHF3 , which have a surface passivation effect, to Oxygen plasmas should be obtained vertical edges at an acceptable etch rate. A RIE parallel plate reactor was used and electroplated nickel film was used as mask. We discuss the influence of pure 02 and O2/CHF3 etching gas on etching profile, the influence of the etching parameters such as gas pressure and CHF3/O2 ratio on vertical etching rate, lateral etching rate and etching profile was also investigated.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Longwang Huang, Longwang Huang, Chunsheng Yang, Chunsheng Yang, Guifu Ding, Guifu Ding, } "Microstructures of PMMA sheet fabricated by RIE", Proc. SPIE 4928, MEMS/MOEMS Technologies and Applications, (10 September 2002); doi: 10.1117/12.483173; https://doi.org/10.1117/12.483173
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT


Back to Top