13 November 2002 Formation of sensitive/active phases in metal and polymer-based structural materials
Author Affiliations +
This paper describes new concepts the author has proposed and demonstrated to realize metal and polymer based sensitive and/or active structural material systems suitable for smart structures. Most of the developments have been done by simple and innovative methods without using sophisticated and expensive sensors and actuators. The following topics are mainly examined: (1) embedding optical fiber in aluminum matrix to use as sensors; (2) forming optical interference and loss type strain sensors in epoxy matrix simply by embedding and breaking notched optical fiber in it; (3) forming a multifunctional sensor in aluminum matrix for temperature and strain monitoring by embedding an oxidized nickel fiber; (4) fabricating multifunctional composites by using conventional structural materials - i) an active laminate of CFRP/aluminum of which unidirectional actuation is realized by electrical resistance heating of carbon fiber in the CFRP layer and its curvature change can be monitored using optical fiber multiply fractured in the CFRP layer, and ii) a multifunctional aluminum-matrix composite where oxidized titanium fiber is embedded for sensing temperature and strain, generation of heat for actuation.
© (2002) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hiroshi Asanuma, Hiroshi Asanuma, "Formation of sensitive/active phases in metal and polymer-based structural materials", Proc. SPIE 4934, Smart Materials II, (13 November 2002); doi: 10.1117/12.471962; https://doi.org/10.1117/12.471962

Back to Top