30 April 2003 Stress corrosion factors of fused fiber components
Author Affiliations +
Abstract
Stress corrosion factors were obtained for the waist region of a fused fiber component using the dynamic fatigue method at ambient temperature and humidity. The n-value obtained is 23.3, which is comparable to that of pristine fiber. The ultimate tensile strength of the waist is much higher than that of the mechanically stripped fiber used to manufacture the components, indicating that flaws and defects are actually repaired during the fusion process. Component lifetime and reliability are estimated.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Patrick Cigana, Patrick Cigana, Francois Seguin, Francois Seguin, } "Stress corrosion factors of fused fiber components", Proc. SPIE 4940, Reliability of Optical Fiber Components, Devices, Systems, and Networks, (30 April 2003); doi: 10.1117/12.498228; https://doi.org/10.1117/12.498228
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

Stress free aging of optical fibers in liquid water and...
Proceedings of SPIE (February 01 1992)
Stress free aging of optical fiber in water and humid...
Proceedings of SPIE (February 25 1993)
Theory and practice of fibre proof testing
Proceedings of SPIE (September 01 1990)
Water tests on optical fibers
Proceedings of SPIE (December 29 1999)
Strength of silica fibers in various moisture conditions
Proceedings of SPIE (April 30 2003)

Back to Top