Paper
15 April 2003 Fabrication of optical 1x2 POF couplers using the laser-LIGA technique
Thomas Klotzbuecher, Torsten Braune, Dalibor Dadic, M. Sprzagala, Anne Koch
Author Affiliations +
Abstract
Plastic optical fibers (POF) continuously gained its importance during the last decade, since they are widely used in automotive applications for optical data communications (for e.g. MOST). The application of POF for in-flight-entertainment (IFE) optical networks in civil aircraft cabin areas is currently under investigation. Since it is expected that the optical networks will develop from a point-to-point network architecture to more complicated structures there will be a need for optical couplers distributing the signals to different suppliers. Typical applications would be for e.g. the distribution of optical data to IFE implemented within single seats of a seat row of an airplane. Within this work the fabrication of an optical 1x2 POF coupler by the Laser-LIGA technique is demonstrated. The Laser-LIGA technique compared to standard X-ray lithography is simpler and more cost effective. Moreover, the Laser ablation technique also allows rapid prototyping of the same structures. The POF couplers fabricated by this technology show insertion loss values down to about 5.6 dB, depending on the waveguide core material and exhibit good uniformity values in the order of 0.1 dB.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Thomas Klotzbuecher, Torsten Braune, Dalibor Dadic, M. Sprzagala, and Anne Koch "Fabrication of optical 1x2 POF couplers using the laser-LIGA technique", Proc. SPIE 4941, Laser Micromachining for Optoelectronic Device Fabrication, (15 April 2003); https://doi.org/10.1117/12.470165
Lens.org Logo
CITATIONS
Cited by 28 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Phase only filters

Waveguides

Laser ablation

Light scattering

Fabrication

Polymethylmethacrylate

Ray tracing

Back to Top