14 July 2003 Customized ablation using an all-solid-state deep-UV laser
Author Affiliations +
Proceedings Volume 4951, Ophthalmic Technologies XIII; (2003) https://doi.org/10.1117/12.477957
Event: Biomedical Optics, 2003, San Jose, CA, United States
We show first deep UV ablation results achieved with our new all solid state laser system. The system parameters allow high repetition rate ablation with a small spot diameter of about 0.250mm and a fluence of 350 mJ/cm2 at a wavelength of 210 nm using sequential frequency conversion of a diode pumped laser source. The single shot and multishot ablation rates as well as the ablation profiles have been defined using MicroProf (Fries Research and Technology GmbH, Germany). By means of computer controlled scanning we produce smooth ablation profiles corresponding to a correction of myopia, hyperopia or astigmatism. Due to the small spot size and high repetition rate of the laser we are able to generate in short time intervals complicated ablation profiles described by higher order polynomial functions which are required for the needs of customized corneal ablation.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
G. Korn, G. Korn, M. Lenzner, M. Lenzner, O. Kittelmann, O. Kittelmann, R. Zatonski, R. Zatonski, M. Kirsch, M. Kirsch, Y. Kuklin, Y. Kuklin, } "Customized ablation using an all-solid-state deep-UV laser", Proc. SPIE 4951, Ophthalmic Technologies XIII, (14 July 2003); doi: 10.1117/12.477957; https://doi.org/10.1117/12.477957


Autokeratomileusis Laser
Proceedings of SPIE (March 10 1987)
Diode-pumped UV refractive surgery laser
Proceedings of SPIE (July 07 1993)
Excimer lasers for submicron feature generation
Proceedings of SPIE (April 01 1992)
Industrial micromachining with advanced solid state lasers
Proceedings of SPIE (February 20 2007)

Back to Top