16 June 2003 Chromium ion valence transformations in Cr, Ca:YAG used for passive Q-switching
Author Affiliations +
Abstract
Composite laser devices of passively Q-switched Nd:YAG were prepared by optical contacting of a Ca,Cr:YAG crystal onto a Nd:YAG wafer, followed by thermal treatments at elevated temperatures. Thermal treatments of the composite devices under reducing and/or oxidizing environments enabled to control the Cr4+ ion concentration, which affects its absorption saturation behavior. Optical absorption saturation measurements on partialy reduced Ca,Cr:YAG crystal revealed that residual absorption of the saturable absorber at 1064 nm results from excited-state absorption. Laser damage measurements at the gain/absorber interface of the monolithic device showed that the damage threshold at the gain/absorber interface of the composite device is higher than at the entrance interface. The high optical quality device thus obtained was end-pumped by a fiber-optic-coupled diode laser, and exhibited a high repetition-rate oscillations of short pulses, with fair beam quality.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Revital Feldman, Revital Feldman, Yehoshua Shimony, Yehoshua Shimony, Zeev Burshtein, Zeev Burshtein, } "Chromium ion valence transformations in Cr, Ca:YAG used for passive Q-switching", Proc. SPIE 4970, Laser Crystals, Glasses, and Nonlinear Materials Growth and Characterization, (16 June 2003); doi: 10.1117/12.483711; https://doi.org/10.1117/12.483711
PROCEEDINGS
14 PAGES


SHARE
RELATED CONTENT


Back to Top