17 October 2003 Excimer laser lift-off for packaging and integration of GaN-based light-emitting devices
Author Affiliations +
Proceedings Volume 4977, Photon Processing in Microelectronics and Photonics II; (2003) https://doi.org/10.1117/12.483854
Event: High-Power Lasers and Applications, 2003, San Jose, CA, United States
Abstract
The delamination of a thin film heterostructure by selective absorption of pulsed laser energy at a buried interface enables the transfer of the thin film heterostructure from its growth substrate to virtually any receptor substrate without significant heating of material outside the interaction zone. By combining this "laser lift-off" process with low-temperature bonding methods, disparate classes of materials can be intimately integrated without exceeding the thermal budget of the least robust of the materials to be integrated. Furthermore, heterostructures that can be grown by epitaxy on one substrate can be transferred intact, without significant deterioration in crystal quality, to a receptor substrate that enhances the performance or functionality of the heterostructure in a device or microsystem. In this paper, applications of laser lift-off in the packaging and integration of light-emitting GaN devices are highlighted. Transfer of these devices from their sapphire growth substrates to thermally and electrically conductive receptor substrates is shown to result in improved device performance through the reduction of thermal and electrical series resistances, and by the improvement in optical design enabled by access to both sides of the heterostructure. Continued development of laser lift-off packaging has the potential to reduce manufacturing costs and complexity as well through the elimination of the sapphire dicing step. Finally, the application of the LLO technique to the assembly of functionally-enhanced microsystems is illustrated with the example of an integrated fluorescence detection microsystem.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Timothy D. Sands, Timothy D. Sands, } "Excimer laser lift-off for packaging and integration of GaN-based light-emitting devices", Proc. SPIE 4977, Photon Processing in Microelectronics and Photonics II, (17 October 2003); doi: 10.1117/12.483854; https://doi.org/10.1117/12.483854
PROCEEDINGS
15 PAGES


SHARE
RELATED CONTENT

InGaN-based flexible light emitting diodes
Proceedings of SPIE (February 16 2017)
8 inch GaN on Si based wafer level chip scale...
Proceedings of SPIE (January 01 1900)
High yield thin GaN LED using metal bonding and laser...
Proceedings of SPIE (October 15 2012)
Laser lift off of GaN thin film and its application...
Proceedings of SPIE (October 10 2012)
Light extraction in individual GaN nanowires on Si for LEDs
Proceedings of SPIE (October 11 2012)
Stress analysis of transferred thin GaN LED by Au Si...
Proceedings of SPIE (September 14 2005)

Back to Top