Paper
16 January 2003 Nonassembled planar electrostatic micro-relay
Nikolay Ivanovich Mukhurov, Georgy I. Efremov, Vyacheslav Kovalevsky
Author Affiliations +
Abstract
The developed and fabricated model of III-shaped non-assembled planar micro-relay is formed of aluminium anodic oxide, which possesses of high electromechanical properties. Film electrodes are formed using local plasma deposition for metallization of corresponding parts. Small-cells structure of the oxide together with photolithography and electrochemical treatment guarantees precision formation of slots and branches sizes, as well as perpendicularity of their walls relative to the substrate plane. The main sizes of the model are: width of the anchor is 60 μm, thickness of the anchor equal inter-electrodes gap is 14 μm, length of electrode is 1000 μm, inter-electrodes gap is 12 μm, active area of the micro-relay is 1,4 mm2. Planar design along with the micro-relay parameters enhancement simplify and shorten technological process, eliminate assembling, lower laboriousness and spoilage.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Nikolay Ivanovich Mukhurov, Georgy I. Efremov, and Vyacheslav Kovalevsky "Nonassembled planar electrostatic micro-relay", Proc. SPIE 4981, MEMS Components and Applications for Industry, Automobiles, Aerospace, and Communication II, (16 January 2003); https://doi.org/10.1117/12.480767
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Electrodes

Microrelays

Oxides

Dielectrics

Plasma

Scattering

Statistical modeling

Back to Top