20 January 2003 Single two-axis micromachined tilt mirror and linear array
Author Affiliations +
Proceedings Volume 4985, MOEMS Display and Imaging Systems; (2003) https://doi.org/10.1117/12.472858
Event: Micromachining and Microfabrication, 2003, San Jose, CA, United States
Abstract
A scanning two-axis tilt mirror has been modeled, fabricated and tested. The tilt mirror device is fabricated from single crystal silicon using bulk micromachining technology. The mirror is octagonal and is suspended by outer torsion hinges, a gimbal, and inner torsion hinges. Response to a driving voltage is investigated, along with frequency response. Finite element modeling was performed and the results compared with experimental data, with good agreement. Using automated and semi-automated placement equipment, linear arrays of the tilt mirrors have been produced.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Michael R. Whitley, Jay A. Hammer, Zhili Hao, Brian Wingfield, Luis Nelson, "Single two-axis micromachined tilt mirror and linear array", Proc. SPIE 4985, MOEMS Display and Imaging Systems, (20 January 2003); doi: 10.1117/12.472858; https://doi.org/10.1117/12.472858
PROCEEDINGS
12 PAGES


SHARE
Back to Top