Birefringence compensation in silicon-on-insulator planar waveguide demultiplexers using a buried oxide layer

Pavel Cheben; Dan-Xia Xu; Siegfried Janz; Andre Delage; Dan Dalacu

doi:10.1117/12.476661

30 May 2003 Birefringence compensation in silicon-on-insulator planar waveguide demultiplexers using a buried oxide layer

Pavel Cheben, Dan-Xia Xu, Siegfried Janz, Andre Delage, Dan Dalacu

Author Affiliations +

Proceedings Volume 4997, Photonics Packaging and Integration III; (2003) https://doi.org/10.1117/12.476661
Event: Integrated Optoelectronics Devices, 2003, San Jose, CA, United States

Abstract

The high index contrast of silicon-on-insulator (SOI) enables the scaling down of planar waveguide components into the microphotonic regime, but has the unwanted consequence of inducing a large TE-TM polarization birefringence. For ridge waveguides this birefringence can be reduced to an acceptable level by using appropriate ridge dimensions [1], but with decreasing Si thickness the required fabrication tolerances quickly become too narrow to implement this solution. Components with slab waveguide regions such as echelle grating demultiplexers cannot be made polarization independent using this method. An alternate approach is to introduce a polarization compensation region in the combiner section of an AWG or echelle grating to eliminate the polarization dependent wavelength shift[2]. In its original implementation, the compensator is fabricated by changing the local waveguide thickness. The resulting birefringence correction can be sensitive to errors in etch depth, and the mode mismatch between compensator and slab waveguide sections is a source of approximately 1 dB extra insertion loss (IL) for SOI demultiplexers with Si waveguide thickness in the range from 2 to 5 m. We describe a new compensator structure for the SOI platform using a buried low index layer, in this case SiO2 sandwiched between the Si waveguide layer and another Si cap layer. Such a silicon-oxide-silicon (SOS) compensator on SOI can eliminate the TE-TM wavelength shift of an SOI AWG or echelle grating demultiplexer without introducing a significant mode mismatch between the compensator and slab waveguide sections. A demultiplexer with an SOS compensator has almost 1 dB lower insertion loss of an equivalent device with an etched compensator. The SOS compensator is easily implemented using standard oxide and a-Si or polysilicon deposition techniques. In this paper we present calculations and experimental results on the effective birefringence compensation, PDL and IL of SOS compensators in SOI waveguide demultiplexers.

Citation Download Citation

Pavel Cheben, Dan-Xia Xu, Siegfried Janz, Andre Delage, and Dan Dalacu "Birefringence compensation in silicon-on-insulator planar waveguide demultiplexers using a buried oxide layer", Proc. SPIE 4997, Photonics Packaging and Integration III, (30 May 2003); https://doi.org/10.1117/12.476661

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available