Physical characteristics of a clinical prototype for full-field digital mammography with an a-Se flat-panel detector

Barbara Lazzari; Giacomo Belli; Cesare Gori; Kirsi Nykanen

doi:10.1117/12.479989

5 June 2003 Physical characteristics of a clinical prototype for full-field digital mamography with an a-Se flat-panel detector

Barbara Lazzari, Giacomo Belli, Cesare Gori, Kirsi Nykanen

Author Affiliations +

Proceedings Volume 5030, Medical Imaging 2003: Physics of Medical Imaging; (2003) https://doi.org/10.1117/12.479989
Event: Medical Imaging 2003, 2003, San Diego, California, United States

Abstract

The purpose of this study was to evaluate physical characteristics of a clinical prototype for full-field digital mammography (FFDM) with an amorphous selenium (a-Se) flat-panel detector (FPD) and to compare these results with the currently available systems for FFDM. The effective FPD area consists of 2816 x 2016 pixel matrix having a pixel pitch of 85μm. This yields to theoretical maximum spatial frequency of ~5.9lp/mm. The basic performance of Instrumentarium clinical prototype direct mammography system has been assessed on the basis of measured response curve, the modulation transfer function (MTF), the noise power spectrum (NPS), the noise equivalent quanta (NEQ) and the detective quantum efficiency (DQE) in the clinical setting. The system shows a linear response curve over a dynamic range from 0.4 mR to 57 mR. The presampling MTF was found to be approximately 0.91, 0.72 and 0.50 at 2, 4 and 5.9 (Nyquist frequency) lp/mm. The NEQ is linearly related to the exposure starting from about 8 mR above which value the system can be considered noise quantum limited. The DQE, evaluated in clinical conditions (28kVp Mo-Mo spectrum hardened by 4cm of PMMA) is at close to zero spatial frequency approximately 69% at 46.4 mR and 61% at 8.3 mR. Below 8 mR the DQE(0) falls to 54.4%, 46% and 32.5% at 5.2, 3.0 and 1.4 mR respectively due to structured and electronic noise. The results of quantitative analysis demonstrate a high MTF as we expected due to direct conversion technology and a high DQE over the exposure range from 8 mR to 50 mR. The NEQ shows that the system can be considered noise quantum limited above 8 mR suggesting the exposure level that should be set in the clinical practice to ensure an adequate image quality.

Citation Download Citation

Barbara Lazzari, Giacomo Belli, Cesare Gori, and Kirsi Nykanen "Physical characteristics of a clinical prototype for full-field digital mamography with an a-Se flat-panel detector", Proc. SPIE 5030, Medical Imaging 2003: Physics of Medical Imaging, (5 June 2003); https://doi.org/10.1117/12.479989

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available