Understanding particle defect transport in an ultra clean sputter coating process

Christopher C. Walton; Patrick A. Kearney; James A. Folta; Donald W. Sweeney; Paul B. Mirkarimi

doi:10.1117/12.484970

16 June 2003 Understanding particle defect transport in an ultra clean sputter coating process

Christopher C. Walton, Patrick A. Kearney, James A. Folta, Donald W. Sweeney, Paul B. Mirkarimi

Proceedings Volume 5037, Emerging Lithographic Technologies VII; (2003) https://doi.org/10.1117/12.484970
Event: Microlithography 2003, 2003, Santa Clara, California, United States

Abstract

Low-defect mask blanks remain a key technical challenge to Extreme Ultraviolet Lithography (EUVL). The mask blank is ion-beam sputter-coated with an 81-layer Mo/Si multilayer stack for high reflectance at l = 13.4nm. The current mask coating process can achieve a median added defect level of 0.05 defects/cm2 (12 added defects 90nm or larger on a 200mm Si-wafer test substrate), but this must be reduced by about a factor of 10 to meet mask cost requirements for EUVL. To further reduce the particle defect level, we have studied pathways for particle transport, using test particles and particles native to the coating process, and combined the results into a computational model of particle transport in an ion-beam sputter system. At process pressure, gas drag is negligible for particles above 100nm, so particles travel ballistically until they hit a surface. Bounce from chamber walls allows particles to reach all surfaces in the chamber if they have initial velocities above ~100m/s. The ion beam has sufficient momentum to entrain slower particles and accelerate them toward the sputter target, where some can bounce to the substrate. The model shows preliminary agreement with experimental defect distributions on witness wafers at various positions within the coating chamber.

Citation Download Citation

Christopher C. Walton, Patrick A. Kearney, James A. Folta, Donald W. Sweeney, and Paul B. Mirkarimi "Understanding particle defect transport in an ultra clean sputter coating process", Proc. SPIE 5037, Emerging Lithographic Technologies VII, (16 June 2003); https://doi.org/10.1117/12.484970

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available