2 June 2003 Evaluation of i-line Nikon Stepper leveling methods for improved CD control
Author Affiliations +
Abstract
The paper examines the viability of various levelling options1 on Nikon i11, i12 and i14 steppers in compensating for across field differences in focus position. The analysis was performed on both production wafers at various processing stages and test wafers with oxide deposited then etched to different depths. The main analysis technique used was the stepper focus measurement system along with Hitachi 9220 CDSEM measurements and levelling beam analysis using a CCD camera2. The conclusion from the paper is that due to diffraction effects of the levelling beam, levelling-on can introduce large wafer stage tilts and so reduce CD control in the i11's and i12's. Since the EGL method also uses the levelling sensor in conjunction with the focus sensors this also introduces large tilts causing large across field CD variation.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ronan Barry, James Thompson, "Evaluation of i-line Nikon Stepper leveling methods for improved CD control", Proc. SPIE 5038, Metrology, Inspection, and Process Control for Microlithography XVII, (2 June 2003); doi: 10.1117/12.483536; https://doi.org/10.1117/12.483536
PROCEEDINGS
9 PAGES


SHARE
Back to Top