Improvement of resist process margin with short develop time process

Osamu Tamada; Masakazu Sanada

doi:10.1117/12.483752

12 June 2003 Improvement of resist process margin with short develop time process

Osamu Tamada, Masakazu Sanada

Proceedings Volume 5039, Advances in Resist Technology and Processing XX; (2003) https://doi.org/10.1117/12.483752
Event: Microlithography 2003, 2003, Santa Clara, California, United States

Abstract

Short develop time process was intensely investigated and characterized. Process margin for two different 193nm chemically amplified positive resists were analyzed for different develop times. It was found that the process margin, Exposure Latitude(EL) and Depth of Focus (DOF) for both resists is increased by shortened develop time. Resist develop rate and pattern wall angle characterization revealed that an improvement in process margin is strongly correlated to the resist develop rate and the key to obtain increased process margin is to terminate the develop reaction while the resist dissolution rate remains large. The “short develop time” benefits are suggested to result from the reduced dependence of the developed pattern on the latent image due to incomplete develop caused by the early termination of the develop reaction. Deeper investigation revealed the resist develop rate was affected by the develop application method as well as resist chemical differences. Dainippon Screen’s (DNS) slit-scan develop system is revealed to be very effective in controlling the resist develop rate because of its ability to apply the developer puddle very still and suitable for the short develop time process. It was also confirmed that the pattern collapse was reduced by shortening develop time. It is suggested this phenomenon is correlated to the penetration of developer into the resist-substrate interface as well as the change in pattern wall angle as a function of develop time. Post-develop defect levels have been confirmed for one 193nm resist over a range different develop times. This study revealed that develop time shortening resulted in fewer develop defects. In summary it is confirmed that short develop time process has the advantages of improved process margin for factors such as EL, DOF, pattern collapse, develop defects as well as throughput.

Citation Download Citation

Osamu Tamada and Masakazu Sanada "Improvement of resist process margin with short develop time process", Proc. SPIE 5039, Advances in Resist Technology and Processing XX, (12 June 2003); https://doi.org/10.1117/12.483752

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available