Translator Disclaimer
31 July 2003 Experimental validation of a novel stictionless magnetorheological fluid isolator
Author Affiliations +
Abstract
Magnetorheological (MR) fluid damper design typically constitutes a piston/dashpot configuration. During reciprocation, the fluid is circulated through the device with the generated pressure providing viscous damping. In addition, the damper is also intended to accommodate off-axis loading; i.e., rotation moments and lateral loads orthogonal to the axis of operation. Typically two sets of seals, one where the piston shaft enters and exits the device and one between the piston and the cylinder wall, maintain alignment of the damper and seal the fluid from leaking. With MR fluid, these seals can act as sources of non-linear friction effects (stiction) and oftentimes possess a shorter lifespan due to the abrasive nature of the ferrous particles suspended in the fluid. Intelligently controlling damping forces must also accommodate the non-linear stiction behavior, which degrades performance. A new, unique MR fluid isolator was designed, fabricated and tested that directly addresses these concerns. The goal of this research was the development of a stiction-free MR isolator whose damping force can be predicted and precisely controlled. This paper presents experimental results for a prototype device and compares those results to model predictions.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Shawn P. Kelso, Keith K. Denoyer, Ross M. Blankinship, Kenneth Potter, and Jason E. Lindler "Experimental validation of a novel stictionless magnetorheological fluid isolator", Proc. SPIE 5052, Smart Structures and Materials 2003: Damping and Isolation, (31 July 2003); https://doi.org/10.1117/12.483966
PROCEEDINGS
12 PAGES


SHARE
Advertisement
Advertisement
Back to Top