18 November 2003 Site-selective dye deposition onto micropatterns of fused silica fabricated with laser-induced backside wet etching (LIBWE)
Author Affiliations +
Proceedings Volume 5063, Fourth International Symposium on Laser Precision Microfabrication; (2003) https://doi.org/10.1117/12.541072
Event: Fourth International Symposium on Laser Precision Microfabrication, 2003, Munich, Germany
Abstract
A novel approach for the fabrication of micropatterns where dye molecules can be site-selectively desposited is described. The micropatterns were fabricated on the surface of fused silica plates using the technique of laser-induced backside wet etching (LIBWE). Prior to the LIBWE process, the surface properties of the fused silica plates were modified with self-assembling trimethoxysilanes bearing functional moieties. On the non-irradiated areas, the self-assembled monolayers (SAMs) survived the LIBWE process, and the remaining SAM acted as a template for the subsequent dye deposition either with chemical bonding or physical adsorption. Site-selective dye deposition was visualized with fluorescence microscopic observation. These results are applicable for micro-fluidic reactors and chemical sensors.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Ximing Ding, Ximing Ding, Yoshizo Kawaguchi, Yoshizo Kawaguchi, Tadatake Sato, Tadatake Sato, Aiko Narazaki, Aiko Narazaki, Hiroyuki Niino, Hiroyuki Niino, } "Site-selective dye deposition onto micropatterns of fused silica fabricated with laser-induced backside wet etching (LIBWE)", Proc. SPIE 5063, Fourth International Symposium on Laser Precision Microfabrication, (18 November 2003); doi: 10.1117/12.541072; https://doi.org/10.1117/12.541072
PROCEEDINGS
6 PAGES


SHARE
Back to Top