Paper
26 September 2003 Low-cost infrared glass for IR imaging applications
Author Affiliations +
Abstract
With the advent of the uncooled detectors, the fraction of infrared (IR) imaging system cost due to lens elements has risen to the point where work was needed in the area of cost. Since these IR imaging systems often have tight packaging requirements which drive the optical elements to have complex surfaces, typical IR optical elements are costly to manufacture. The drive of our current optical material research is to lower the cost of the materials as well as the element fabrication for IR imaging systems. A low cost, moldable amorphous material, Amtir-4, has been developed and characterized. Ray Hilton Sr., Amorphous Materials Inc., Richard A. LeBlanc, Amy Graham and Others at Lockheed Martin Missiles and Fire Control Orlando (LMMFC-O) and James Johnson, General Electric Global Research Center (GE-GRC), along with others have been doing research for the past three years characterizing and designing IR imaging systems with this material. These IR imaging systems have been conventionally fabricated via diamond turning and techniques required to mold infrared optical elements have been developed with this new material, greatly reducing manufacturing costs. This paper will outline efforts thus far in incorporating this new material into prototype IR imaging systems.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Amy G. Graham, Richard A. LeBlanc, and Ray Albert Hilton Sr. "Low-cost infrared glass for IR imaging applications", Proc. SPIE 5078, Window and Dome Technologies VIII, (26 September 2003); https://doi.org/10.1117/12.496915
Lens.org Logo
CITATIONS
Cited by 14 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Infrared imaging

Germanium

Optical components

Imaging systems

Coating

Glasses

Infrared radiation

RELATED CONTENT

Layered chalcogenide glass structures for IR lenses
Proceedings of SPIE (July 01 2014)
IR GRIN optics: design and fabrication
Proceedings of SPIE (June 01 2017)
Infrared Optical Grade Germanium
Proceedings of SPIE (September 07 1979)
High-precision IR molded lenses
Proceedings of SPIE (February 26 2004)

Back to Top