Laser surface microstructuring to improve tribological systems

Valerio Romano; Heinz P. Weber; Gabriel Dumitru; Sergej M. Pimenov; Taras V. Kononenko; Vitali I. Konov; Henry Haefke; Yvonne Gerbig; Marc L. Sentis; Joerg Hermann; Sebastien Bruneau; Wladimir Marine

doi:10.1117/12.515572

2 September 2003 Laser surface microstructuring to improve tribological systems

Valerio Romano, Heinz P. Weber, Gabriel Dumitru, Sergej M. Pimenov, Taras V. Kononenko, Vitali I. Konov, Henry Haefke, Yvonne Gerbig, Marc L. Sentis, Joerg Hermann, Sebastien Bruneau, Wladimir Marine

Author Affiliations +

Proceedings Volume 5121, Laser Processing of Advanced Materials and Laser Microtechnologies; (2003) https://doi.org/10.1117/12.515572
Event: Laser Processing of Advanced Materials and Laser Microtechnologies, 2002, Moscow, Russian Federation

Abstract

The controlled laser patterning of solid surfaces improves their wear properties: laser generated microcraters of defined dimensions and morphology can act as lubricant reservoirs and as traps for wear particles. For generating such microstructures different techniques are possible; however laser ablation has the advantage of a great versatility, since it can be adapted to produce a wide range of structures crater arrangements. We have generated microstructures with ps- and ns- pulses on TiN coated steel, uncoated steel and on uncoated steel with was subsequently coated with TiCN. Laser patterning of metals with pulses in the 100ns range is very effective however the process is governed by local melting and vaporization. The melt ejection yields the formation of resolidified droplets and rims on the target surface. This undesired artifacts can be removed by gentle polishing. Furthermore, a recast layer of increased hardness and brittleness of about 1µm thickness which homogeneously covers the crater walls is observed. Tribological tests were performed using the ball-on-disk method. The lifetime of the structured samples, defined as the sliding distance after which the friction coefficient showed an abrupt increase, was found to be significantly enhanced for all structured surfaces. The enhancement ranged from a 30% lifetime increase when TiN coatings were directly structured to an increase of over 10 times for structured hard metal which was subsequently coated with TiCN. To evaluate the possibility of circumventing some of the drawbacks of laser ablation in the ns regime, mainly the melt rims on the surface and the recast layer film on the crater walls of the single microholes the quality of microstructures produced in various metals with pulses of femtosecond duration was studied. To that end the evolution of the ablated depth over a large number of incident femtosecond laser pulses and the occurrence of structure and hardness changes in the immediate vicinity of the laser induced craters was analyzed for two sorts of steel and for hard metal. The analysis evidenced changes in the crystalline structure of the target materials in the fluence regime above 2J/cm² but only minor alterations up to this fluence. Hardness measurements were performed on the cross-section surfaces in points situated in the immediate vicinity of the laser induced pores. Affected zones in the material surrounding few pores induced in the fs- regime were found and in such zones a significant hardness increasing was evidenced.

Citation Download Citation

Valerio Romano, Heinz P. Weber, Gabriel Dumitru, Sergej M. Pimenov, Taras V. Kononenko, Vitali I. Konov, Henry Haefke, Yvonne Gerbig, Marc L. Sentis, Joerg Hermann, Sebastien Bruneau, and Wladimir Marine "Laser surface microstructuring to improve tribological systems", Proc. SPIE 5121, Laser Processing of Advanced Materials and Laser Microtechnologies, (2 September 2003); https://doi.org/10.1117/12.515572

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available