28 August 2003 Mask cost and cycle time reduction
Author Affiliations +
Proceedings Volume 5130, Photomask and Next-Generation Lithography Mask Technology X; (2003) https://doi.org/10.1117/12.504288
Event: Photomask and Next Generation Lithography Mask Technology X, 2003, Yokohama, Japan
Abstract
In the IC industry the mask cost and cycle time have increased dramatically since the chip design has become more complex and the required mask specification, tighter. The lithography technology has been driven to 65-nm node and 90-nm product will be manufacturing in 2004, according to ITRS's roadmap. However, the optical exposure tools do not extend to a shorter wavelength as the critical dimension (CD) shrinks. In such sub-wavelength technology generation, the mask error factor (MEF) is normally higher. Higher MEF means that tighter mask specification is required to sustain the lithography performance. The tighter mask specification will impact both mask processing complexity and cost. The mask is no longer a low-cost process. In addition, the number of wafers printed from each mask set is trending down, resulting in a huge investment to tape out a new circuit. Higher cost discourages circuit shrinking, thus, prohibits commercialization of new technology nodes.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Hong-Chang Hsieh, Hong-Chang Hsieh, Johnson Chang-Cheng Hung, Johnson Chang-Cheng Hung, Angus S. J. Chin, Angus S. J. Chin, Sheng-Cha Lee, Sheng-Cha Lee, Jaw-Jung Shin, Jaw-Jung Shin, Ru-Gun Liu, Ru-Gun Liu, Burn J. Lin, Burn J. Lin, } "Mask cost and cycle time reduction", Proc. SPIE 5130, Photomask and Next-Generation Lithography Mask Technology X, (28 August 2003); doi: 10.1117/12.504288; https://doi.org/10.1117/12.504288
PROCEEDINGS
12 PAGES


SHARE
Back to Top