Large-format 0.85- to 2.5-um HgCdTe detector arrays for low-background applications

Peter J. Love; Alan W. Hoffman; David J. Gulbransen; Mark P. Murray; Ken J. Ando; Neil J. Therrien; Joseph P. Rosbeck; Roger S. Holcombe

doi:10.1117/12.506258

12 January 2004 Large-format 0.85- and 2.5-μm HgCdTe detector arrays for low-background applications

Peter J. Love, Alan W. Hoffman, David J. Gulbransen, Mark P. Murray, Ken J. Ando, Neil J. Therrien, Joseph P. Rosbeck, Roger S. Holcombe

Author Affiliations +

Proceedings Volume 5167, Focal Plane Arrays for Space Telescopes; (2004) https://doi.org/10.1117/12.506258
Event: Optical Science and Technology, SPIE's 48th Annual Meeting, 2003, San Diego, California, United States

Abstract

The demand for large-format NIR arrays has grown for both ground-based and space-based applications. These arrays are required for maintaining high resolution over very large fields of view for survey work. We describe results of the development of a new 2048 x 2048 HgCdTe/CdZnTe array with 20-micron pixels that responds with high quantum efficiency over the wavelength range 0.85 to 2.5 microns. With a single-layer anti-reflection (AR) coating, the responsive quantum efficiency is expected to be greater than 85% from 0.9 micron to 2.4 microns. The modular package for this array, dubbed the VIRGO array, allows three-side butting to form large mosaic arrays of 4K x 2nK format. The VIRGO readout integrated circuit (ROIC) utilizes a Source Follower per Detector (SFD) input circuit with a well capacity of about 2 x 10⁵ electrons and with a read noise of less than 20 e-rms with off-chip Correlated Double Sampling (CDS). Other features of the VIRGO array include 4 or 16 outputs (programmable), and a frame rate of up to 1.5 Hz in 16-output mode. Power dissipation is about 7 mW at a 1 Hz frame rate. Reset modes include both global reset and reset by row (ripple mode). Reference pixels are built-in to the output data stream. The first major application of the VIRGO array will be for VISTA, the United Kingdom’s Visible and Infrared Survey Telescope for Astronomy. The VISTA FPA will operate near 80K. Dark current is less than 0.1e-/sec at 80K. The cutoff wavelength of the HgCdTe detector can be adjusted for other applications. Space applications might include SNAP, the Supernova/Acceleration Probe, which requires a shorter detector cutoff wavelength of about 1.7 microns. For applications which require both visible and NIR response, the detector CdZnTe substrate can be removed after hybridization, allowing the thinned detector to respond to visible wavelengths as short as 0.4 microns.

Citation Download Citation

Peter J. Love, Alan W. Hoffman, David J. Gulbransen, Mark P. Murray, Ken J. Ando, Neil J. Therrien, Joseph P. Rosbeck, and Roger S. Holcombe "Large-format 0.85- and 2.5-μm HgCdTe detector arrays for low-background applications", Proc. SPIE 5167, Focal Plane Arrays for Space Telescopes, (12 January 2004); https://doi.org/10.1117/12.506258

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available