3 November 2003 Integral optical system design of injection molded optics
Author Affiliations +
Abstract
Injection molded optics are frequently applied in many high volume applications. Bar code scanners, CD / DVD systems, CMOS cameras are a few examples. In all of these applications cost effective and fast design cycles are essential. At Philips High Tech Plastics we developed a design system that touches on all different aspects of the system design. Starting with traditional lens design (sequential ray tracing) and tolernacing we transport the initial design into mechanical solid modeling. During mechanical modeling, tolerances, injection molding design rules and integration of mechanical features, reference marks, etc. are incorporated as well. Here the full advantage of injection molding can be utilized. After the opto - mechanical modeling the system is ported back to non - sequential ray tracing for ghost - and stray light analysis. Finally extended tolerancing is performed in order to come to a robust high volume product. If necessary all or several steps in this design process are repeated in order to arrive at the final design. As an additional requirement the metrology possibilities for the design are checked in at an early stage. This integral system approach to optical design, including optical modeling (sequential and non-sequential) combined with mechanical solid modeling is presented using some recent examples.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Stefan M. Baumer, Stefan M. Baumer, Lena Shulepova, Lena Shulepova, Jan Willemse, Jan Willemse, Kor Renkema, Kor Renkema, } "Integral optical system design of injection molded optics", Proc. SPIE 5173, Current Developments in Lens Design and Optical Engineering IV, 517305 (3 November 2003); doi: 10.1117/12.508593; https://doi.org/10.1117/12.508593
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

Computer Aided Design For Production Cost Reduction
Proceedings of SPIE (November 30 1978)
The TRS-80 As An Optical Design Computer
Proceedings of SPIE (September 15 1980)
Design of null tests for an F 0.8 concave oblate...
Proceedings of SPIE (October 11 2010)

Back to Top