Translator Disclaimer
12 December 2003 Protected silver coatings for low-scatter SiC and SiC/Si mirror surfaces
Author Affiliations +
Abstract
Flat surfaces of reaction bonded SiC and aspheric surfaces of Si clad reaction bonded SiC were polished to yield rms surface roughnesses less than 30Å. These surfaces were then overcoated with two formulations of a typical front surface protected silver film and their reflectances and roughnesses compared with highly polished fused silica flat surfaces that were silver coated at the same time. Surface roughness and BRDF measurements performed before and after coating with protected silver indicated no significant increase in surface roughness or measured scatter for either silver coating formulation and a barely detectable measured roughness difference between the two coating formulations.
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
James B. Heaney, Manuel A. Quijada, Ian C. Stevenson, Ritva A. M. Keski-Kuha, Jay R. Schwartz, and Joseph Robichaud "Protected silver coatings for low-scatter SiC and SiC/Si mirror surfaces", Proc. SPIE 5179, Optical Materials and Structures Technologies, (12 December 2003); https://doi.org/10.1117/12.507146
PROCEEDINGS
12 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT


Back to Top