22 December 2003 Optical characterization of the beryllium semi-rigid AMSD mirror assembly
Author Affiliations +
Abstract
The 1.4-m semi-rigid, beryllium Advanced Mirror System Demonstrator (AMSD) mirror has been lightweighted by over 90% (achieving 10 kg/m2 areal density) and optically ground and polished. The mounting structures have been completed and key attachments integrated prior to final polishing. The displacement actuators have been fabricated and tested at ambient and cryogenic temperatures. The integrated assembly represents an off-axis, aspheric, flight panel of a spaceborne mirror array whose radius of curvature (RoC) can be matched with its companion segments and whose position can be separately phased in a rigid body fashion. The results of the initial ambient testing and the cryogenic test set-up of the mirror assembly will be presented including mirror surface characterization and the correction afforded by radius of curvature actuation. Cryogenic testing at MSFC was completed in August 2003. The lightweighted, semi-rigid mirror architecture approach demonstrated here is a precursor to the mirror technology being applied to the James Webb Space Telescope (JWST).
© (2003) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Stephen E. Kendrick, David Chaney, Robert J. Brown, "Optical characterization of the beryllium semi-rigid AMSD mirror assembly", Proc. SPIE 5180, Optical Manufacturing and Testing V, (22 December 2003); doi: 10.1117/12.506386; https://doi.org/10.1117/12.506386
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT

Cryogenic distortion at 4.4 K of a 50 cm diameter...
Proceedings of SPIE (October 23 1995)
JWST primary mirror technology development lessons learned
Proceedings of SPIE (August 23 2010)
In process status of the 1.4 m beryllium semi rigid...
Proceedings of SPIE (December 27 2001)
JWST mirror technology development results
Proceedings of SPIE (September 14 2007)

Back to Top